Chapter 16 Managing an ELAN
224 Avaya M770 ATM Switch User’s Guide
To change the maximum number of LESes in an ELAN, enter the lane elan
maxles command:
Note: The above change does not affect the ELAN until the next time it is activated.
LANE 2.0 Capability
The LANE 2.0 capability of an ELAN is, by default, 'auto'. Meaning that the first LES
registers to this ELAN determines the capability of the ELAN.
To display and change the LANE 2.0 capability of an ELAN use the lane elan
lane2 command:
Note: If the ELAN capability was changed dramatically (e.g. from 'on' to 'off', or vice
versa), the ELAN has to be restarted in order for the change to take effect. The
restart of the ELAN may cause temporary disruption.
Command: M15-155s8:/>lane elan maxles <name> <maxles>
Example: M15-155s8:/>lane elan maxles accounts_elan 5
Parameters: <name> The name of the ELAN that supports distributed LANE Services. The
name must be 32 characters or less.
<maxles> The maximum number of LESes supported in this ELAN. The largest
value allowed is 10. The default value is 5.
If this last parameter is omitted then the current maximum number
of LESes will be displayed for the selected ELAN.
Command: M15-155s8:/>lane elan lane2 <name> [on|off|auto]
Parameters: <name> The name of the ELAN.
Example: M15-155s8:/>lane elan lane2 default
Output Default's LANE 2 capability configured to auto (actual on)