Avaya M770 - page 83

Chapter 6 Managing Virtual Ports
Avaya M770 ATM Switch User’s Guide 63
Listing bandwidth information for all virtual ports
To view bandwidth information for all virtual ports on a module, use the vport
show bandwidth command.
DS3 modules use traffic shaping on virtual ports. Traffic is shaped based on the total
bandwidth assigned to each virtual port. The bandwidth assigned can be seen as
Total BW. For more information see “Traffic shaping for DS3 virtual ports“ on page
64.
On non-DS3 modules there is no rate limit shaping. Therefore the maximum
transmit rate for a vport is limited by the capacity of the physical port and not by the
total bandwidth assigned to the vport. .
Command: M4-DS3s8:/>vport show bandwidth status (cells/sec)
Output: Virtual Port Bandwidth status (cells/sec)
----------------------
Total BW Alloc BW Curr Curr
Virtual
Port ID In Out In Out PVPC PVCC SVPC SVCC
8.0.0 34732
134732 1000000
8.1.0 90118 90118 000000
8.1.3 2358 2358 000000
8.1.5 11792 11792 000000
8.2.0 43980 43980 000000
8.2.3 47168 47168 000000
8.2.4 13120 13120 000000
8.3.0 10426
810426 8000000
8.4.0 10426
810426 8000000