Chapter 8 Permanent Virtual Connections (PVCs and PVPs)
112 Avaya M770 ATM Switch User’s Guide
Disabling a PVP connection
To temporarily disable an established PVP connection, use the pvp disable
command.
Enabling a PVP connection
To enable an established PVP connection, use the pvp enable command.
Listing all the VPLs
To list all the VPLs, use the pvp vpl show command:
The pvp vpl show command displays the information described in Table 8.4
Command: M15-155s8:/>pvp disable <pvp-id>
Example: M15-155s8:/>pvp disable enable 270047153
Parameters: <pvp-id> PVP connection index
Command: M15-155s8:/>pvp enable <pvp-id>
Example: M15-155s8:/>pvp enable 270047153
Parameters: <pvp-id> PVP connection index
Command: M15-155s8:/>pvp vpl show
Output: VPL | X CONNECT ID
|FWD TD
|REV TD
|STATE
=================================================
============
6.3.7
|270047153
|1
|1
|UP
9.1.7
|270047513
|1
|1
|UP
Table 8.4 Output from the pvp vpl show command
Field Description
VPL The unique VPL identifier in terms of slot.port.vpi
X CONNECT ID The PVP connection that is using this VPL.
FWD TD The forward traffic descriptor identifier
REV TD The reverse traffic descriptor identifier
State The management state of the corresponding PVP
connection