Chapter 15 Managing the LES/BUS
206 Avaya M770 ATM Switch User’s Guide
To change the ELAN name that the LES will host, use the lane les elan command.
Note: The above command will take immediate effect. The command must be used
with care as all LECs will be thrown off the ELAN hosted by the LES. If a LEC is
configured to use the old ELAN name then it must be reconfigure d manually to use
the new ELAN name.
Changing the LES registration mode
Before you change the registration mode of a LES, you must be aware of the mode
of the ELAN that it will be hosting and that the choice of mode is supported by the
device containing the LECS.
Refer to Table 15.3 a list of compatible LES and ELAN modes that should be used.
By default for the pre-defined ELANs, the LES mode is set to register automatically
and the LES modes are set to distributed:
To change the registration mode of the LES, enter the lane les mode command.
Command: M15-155s8:/>lane les elan <old-name> <new-name>
Example: M15-155s8:/>lane les elan marketing_eth mrk_eth
Parameters: <old-name> The current name of the ELAN that is hosted by
the LES that you want to change.
This parameter is case-sensitive.
<new-name> The new ELAN that is somewhere on the network
and is known to the LECS that the local LES will
host. This parameter is case-sensitive.
Table 15.3 Compatible LES and ELAN modes
LES mode LECS ELAN mode
distributed auto
standby auto
manual manual
Command: M15-155s8:/>lane les mode <elan-name> {distributed | standby | manual}
Example: M15-155s8:/>lane les mode marketing_eth standby