Avaya M770 - page 304

Appendix B Using BOOT Loader
284 Avaya M770 ATM Switch User’s Guide
Controlled shutdown of the switch
This command is used for a co ntrolled shutdown of a module, any connections that
still remain on that module will be lost. A warning to this effect is displayed and
confirmation is requested before the module is powered down.
To carry out a controlled shutdown of the switch in preparation for a power down,
use the system halt command.
Note: This command should be carried out before the M770 ATM Switch has its
power disconnected.
Command: M15-155s8:/>system halt
Output: This will stop the module, losing all
connections - do you want to continue (y/n)?