Chapter 6 Managing Virtual Ports
90 Avaya M770 ATM Switch User’s Guide
The vport connections svcs command displays the information described in
Table 6.7.
Listing permanent virtual circuits
To list the details of all PVCs, enter the vport connections pvcs command.
Note: When the above command is used both PVCs that are enabled and disabled
will be listed.
The vport connections pvcs command displays the information described in
Table 6.7.
Command: M15-155s8:/>vport connections pvcs [td] [<vport id>]
[<vport id>]
Example: M15-155s8:/>vport connections pvcs 8.2.0
Parameters: [td] Displays the ATM Traffic Descriptor
[<vport id>] Lists all PVCs passing through the vport
[<vport id>]
[<vport id>] Lists all PVCs between the two vports.
Table 6.7 Output from the vport connections command
Field Description
slot.port.vpi.vci The physical port, VPI, and VCI that are assigned to
the connection. For a PVC, this is the Virtual Circuit
Link (VCL).
rXcount The number of cells received on this connection.
PD Indicates whether or not packet discard is enabled.
“N” indicates that it is not enabled.
SCAT The service category that is used for the virtual circuit.
Up Time Indicates how long the virtual circuit has been active
in days, hours, minutes, seconds, and hundredths of a
second.