SNMP Community Names Screen
To establish community names, proceed as follows:
1.Use the arrow keys to highlight the Community Name field adjacent to the selected access level.
2.Enter the password in the field (maximum 31 characters).
3.Press ENTER.
4.Repeat steps 1 through 3 to modify the other community names.
5.Use the arrow keys to highlight SAVE at the bottom of the screen and press ENTER. The message “SAVED OK” displays. The community names are saved to memory and their access modes implemented.
NOTE |
Exiting without saving causes a “NOT SAVED?” message to display above the SAVE command. Edits will be lost if they are not saved before exiting.
|
