Cabletron Systems 2E43-27R, 2E42-27R manual Device Specific Configuration Menu Screen

Chapter 5: Local Management

To set the Operation Mode for all ports (1-24), proceed as follows:

1.Use the arrow keys to highlight the SET ALL PORTS field.

2.Press the SPACE bar until you see FULL or STANDARD.

3.Use the arrow keys to highlight the SAVE command on the bottom line of the screen.

4.Press ENTER. The message “SAVED OK” displays.

5.12DEVICE SPECIFIC CONFIGURATION MENU SCREEN

The Device Specific Configuration Menu screen, Figure 5-19, allows the user to select one of five screens to configure ports or check system resources specific to the 2E4X-27.

NOTE

The following menu items on the Device Specific Configuration Menu screen may not display if the operational mode of the device is set to 802.1Q SWITCHING or SECURE FAST VLAN:

PORT REDIRECT FUNCTION

BROADCAST SUPPRESSION

Refer to the Release Notes to see if the functionality provided above screens is supported. Section 5.7.9 describes how to the set the operational mode.

To access the Device Specific Configuration Menu screen from the Device Configuration Menu screen, use the arrow keys to highlight the DEVICE SPECIFIC CONFIGURATION menu item and press ENTER. The Device Specific Configuration Menu screen displays.

5-42 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide