Cabletron Systems 2E42-27R, 2E43-27R manual High Speed Interface Configuration Menu Screen

High Speed Interface Configuration Menu Screen

To access the High Speed Interface Configuration Menu screen from the Device Specific Configuration Menu screen, use the arrow keys to highlight the HIGH SPEED INTERFACE CONFIGURATION menu item and press ENTER. The High Speed Interface Configuration Menu screen, Figure 5-21, displays.

Event Message Line

	2E42-27 LOCAL MANAGEMENT
	High Speed Interface Configuration Menu
Device Type: 2E42-27	Firmware Revision:	XX.XX.XX
	BOOTPROM Revision: XX.XX.XX
	FAST ETHERNET INTERFACES
	HSIM
SAVE
	EXIT		RETURN

19601-53

Figure 5-21 High Speed Interface Configuration Menu Screen

The following briefly explains each screen accessible from the High Speed Interface Configuration Menu screen.

FAST ETHERNET INTERFACES

Displays the types of interfaces installed in ports 25 and 26, their current operating mode, and indicates if the ports are linked. This screen also allows the user to enable or disable Auto-Negotiation and set the Advertised Ability. For details, refer to Section 5.15.

HSIM

Displays the types of interfaces installed in the High Speed Interface Module (HSIM) slot. The HSIM screens are depicted in their respective user’s guides.

2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-47