Cabletron Systems 2E43-27R, 2E42-27R manual General Configuration Screen

Chapter 5: Local Management

5.7GENERAL CONFIGURATION SCREEN

The General Configuration screen, Figure 5-9, allows the user to set the system date and time, IP addresses and Subnet Masks, the Default Gateway, the TFTP Gateway IP address, and the COM port configuration.

To access the General Configuration screen from the Device Configuration Menu screen, use the arrow keys to highlight the GENERAL CONFIGURATION menu item and press ENTER. The General Configuration screen displays.

Event Message Line

			2E42-27 LOCAL MANAGEMENT
				General Configuration
Device Type: 2E42-27						Firmware Revision:	XX.XX.XX
						BOOTPROM Revision: XX.XX.XX
MAC Address:			00-00-ID-00-00-00			Device Date:	01/11/97
IP Address:						Device Time:	14:23:00
			0.0.0.0
Subnet Mask:		0.0.0.0				Screen Refresh Time:	03 sec.
Default Gateway:			NONE DEFINED			Screen Lockout Time:	15 min.
TFTP Gateway IP Addr:		0.0.0.0				Device Uptime XX D XX H XX M
Operational Mode:	[802.1D SWITCHING]
Com: [ENABLED]		Application:			[LM]
Clear NVRAM:	[NO]	IP Fragmentation:			[ENABLED ]
SAVE					EXIT		RETURN

19603-15

Figure 5-9 General Configuration Screen

The following briefly explains each General Configuration screen field:

MAC Address (Read-Only)

Displays the physical address of the 2E4X-27.

IP Address (Modifiable)

Displays and allows the user to set the IP address for the 2E4X-27. To set the IP address, refer to Section 5.7.1. The IP address can also be set through Runtime IP Address Discovery as previously described in Section 1.4.4.

5-16 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide