Cabletron Systems 2E42-27R, 2E43-27R manual 10.1

			Contents
5.8	SNMP Community Names Screen		5-31
	5.8.1	Establishing Community Names	5-32
5.9	SNMP Traps Screen		5-34
	5.9.1	Configuring the Trap Table	5-35
5.10	Switch Configuration Screen		5-36
	5.10.1	Setting the STA	5-38
	5.10.2	Setting the Age Time Field	5-38
	5.10.3	Setting (Enabling or Disabling) the Port Status	5-38
5.11	Ethernet Full Duplex Configuration Screen		5-39
	5.11.1	Setting the Operation Mode	5-41
5.12	Device Specific Configuration Menu Screen		5-42
5.13	System Resources Screen		5-44
	5.13.1	Setting the Reset Peak Switch Utilization	5-46
5.14	High Speed Interface Configuration Menu Screen		5-46
5.15	High Speed Interface Configuration Screen		5-48
	5.15.1	Configuring an FE-100FX or FE-100F3
		in Port 25 or 26	5-51
	5.15.2	Setting the FE-100FX or FE-100F3
		Operational Mode	5-51
	5.15.3	Configuring an FE-100TX in Port 25 or 26	5-51
	5.15.4	Setting the FE-100TX Operational Mode	5-51
	5.15.5	Setting the FE-100TX Advertised Ability	5-52
5.16	Flash Download Screen		5-53
	5.16.1	Image File Download Using BootP	5-55
	5.16.2	Image File Download Using TFTP	5-55
	5.16.3	Image File Download Using Runtime	5-56
5.17	Port Redirect Function Screen		5-58
	5.17.1	Displaying the Source and Destination Entries	5-60
	5.17.2	Changing Source and Destination Ports	5-60
5.18	Broadcast Suppression Screen		5-61
	5.18.1	Setting the Threshold	5-63
	5.18.2	Setting the Reset Peak	5-63
5.19	Device Statistics Menu Screen		5-64
5.20	Switch Statistics Screen		5-66
5.21	Interface Statistics Screen		5-67
	5.21.1	Displaying Interface Statistics	5-71
	5.21.2	Using the Clear Counters Command	5-71
5.22	RMON Statistics Screen		5-72
	5.22.1	Displaying RMON Statistics	5-75
	5.22.2	Using the Clear Counters Command	5-76
5.23	Network Tools		5-76
	5.23.1	Built-in Commands	5-79
	5.23.2	Special Commands	5-88

2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide ix