Cabletron Systems 2E43-27R, 2E42-27R manual Changing the Com Port Application

Chapter 5: Local Management

3.Use the arrow keys to highlight YES. Press ENTER.

4.If you ENABLED the port, proceed to step 5. If you DISABLED the port, use the arrow keys to highlight SAVE at the bottom of the screen, then press ENTER.

NOTE

Exiting without saving causes the message “NOT SAVED -- PRESS SAVE TO KEEP CHANGES” to appear. Exiting without saving causes all edits to be lost.

5.When the message “SAVED OK” appears, the edits you made are saved.

5.7.10.1 Changing the Com Port Application

After enabling the COM port as described in Section 5.7.10, one of the applications supported by the COM port (LM or UPS) can be selected. The default application is LM.

To change the COM port application:

1.Use the arrows keys to highlight the Application field.

2.Use the SPACE bar or BACKSPACE to step through the available settings until the operation you require appears. Table 5-3lists the available settings and their corresponding applications.

	Table 5-3 COM Port Application Settings
Setting		Application
[LM]		Local Management Session
[UPS]		APC Power Supply SNMP Proxy

3.Press ENTER to accept the application.

4.Use the arrow keys to highlight SAVE at the bottom of the screen, then press the ENTER key. The message “SAVED OK” displays, indicating that the edits are saved.

5-28 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide