Cabletron Systems 2E43-27R, 2E42-27R manual Snmp Traps Screen

Chapter 5: Local Management

5.9SNMP TRAPS SCREEN

Since the 2E4X-27 is an SNMP compliant device, it can send messages to multiple Network Management Stations to alert users of status changes. The SNMP Traps screen is shown in Figure 5-16.

To access the SNMP Traps screen from the Device Configuration Menu screen, use the arrow keys to highlight the SNMP TRAPS menu item and press ENTER. The SNMP Traps screen displays.

Event Message Line

	2E42-27 LOCAL MANAGEMENT
	SNMP Traps
Device Type: 2E42-27		Firmware Revision: XX.XX.XX
		BOOTPROM Revision: XX.XX.XX
Trap Destination	Trap Community Name	Enable Traps
	public	[NO]
0.0.0.0
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
SAVE	EXIT	RETURN

19601-17

Figure 5-16 SNMP Traps Screen

The following explains each field of the SNMP Traps screen.

Trap Destination (Modifiable)

Indicates the IP address of the workstation to receive trap alarms. Up to eight different destinations can be defined.

Trap Community Name (Modifiable)

Displays the Community Name included in the trap message sent to the Network Management Station with the associated IP address.

5-34 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide