Chapter 5: Local Management
5.10SWITCH CONFIGURATION SCREEN
NOTE |
The Switch Configuration screen is not available if the operational mode of the device is set to SECURE FAST VLAN. This screen may only be used when the device is configured to operate as a traditional or 802.1Q switch.
The Switch Configuration screen, Figure
To access the Switch Configuration screen from the Device Configuration Menu screen, use the arrow keys to highlight the SWITCH CONFIGURATION menu item and press ENTER. The Switch Configuration screen displays up to 8 ports. To view or edit the fields for other ports, highlight
Event Message Line
|
|
|
| |
| Switch Configuration |
|
| |
Device Type: | Firmware Revision: | XX.XX.XX | ||
|
| BOOTPROM Revision: XX.XX.XX | ||
|
|
|
|
|
Switch Address: | Type of STA: | [DEC] |
| |
Number of Ports: | 27 | Age Time (sec): | 300 |
|
|
|
| ||
Port # | MAC Address | State | Status | |
1 | learning | [ENABLED] | ||
2 | listening | [DISABLED] | ||
3 | standby | [ENABLED] | ||
4 | learning | [DISABLED] | ||
5 | listening | [ENABLED] | ||
6 | standby | [DISABLED] | ||
7 | listening | [ENABLED] | ||
8 | listening | [DISABLED] | ||
SAVE | EXIT | RETURN | ||
Figure 5-17 Switch Configuration Screen
The following describes each field of the Switch Configuration screen:
Switch Address
Displays the MAC address of the switch.
|
