Cabletron Systems 2E42-27, 2E43-27 manual There are two categories of commands in the command set

Network Tools

Welcome to Network Tools

-> help

Commands Available to User

Built in Commands:
arp	bridge	defroute
netstat	ping	reset
show	traceroute
soft_reset	telnet	link_trap

atm_stp_state

SPECIAL:

done, quit, or exit - Exit from the Network Tools.

For help with a specific command, type 'help <command>'.

->

090829

Figure 5-30 Network Tools Screen

The Network Tools functions are performed using a series of commands. Entering commands in Network Tools involves typing the command to be executed at the Network Tools prompt, adding any desired or required extensions, and pressing ENTER.

There are two categories of commands in the command set.

•Built-in Commands – Allow the user to access and manage network devices. The commands are: arp, bridge, defroute, netstat, ping, reset, show, traceroute, soft-reset, telnet, link_trap, and atm_stp_state.

•Special Commands – Allow the user to exit from Network Tools. The commands are done, exit, and quit.

2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-77