Cabletron Systems 2E43-27, 2E42-27 manual Setting the Subnet Mask, 10 Configuration Warning Screen

Chapter 5: Local Management

Event Message Line

WARNING!

YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION ITEMS THAT REQUIRE RESETTING THIS MODULE.

ARE YOU SURE YOU WANT TO CONTINUE?

YES NO

1960-84

Figure 5-10 Configuration Warning Screen

5.Use the arrow keys to highlight the YES command, then press ENTER. The changes are saved and the device reboots.

5.7.2Setting the Subnet Mask

If the management workstation that is to receive SNMP traps from the 2E4X-27 is located on a separate subnet, the subnet mask for the 2E4X-27 may need to be changed from its default.

To change the subnet mask from its default, perform the following steps:

1.Use the arrow keys to highlight the Subnet Mask field.

2.Enter the subnet mask into this field using Dotted Decimal Notation (DDN) format.

For example: 255.255.0.0

3.Press ENTER. If the subnet mask is valid, the cursor returns to the beginning of the Subnet Mask field. If the entry is not valid, the Event Message Line displays “INVALID SUBNET MASK OR FORMAT ENTERED”. Local Management does not alter the current value, but it does refresh the Subnet Mask field with the previous value.

5-20 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide