Cabletron Systems 2E42-27R, 2E43-27R manual Interface Statistics Screen

Interface Statistics Screen

Frames Rcvd (Read-Only)

Displays the number of frames received by the interface since last power-up or reset.

Frames Txmtd (Read-Only)

Displays the number of frames transmitted by the interface since last power-up or reset.

Frames Fltrd (Read-Only)

Displays the number of frames filtered by the interface since last power-up or reset.

Frames Frwded (Read-Only)

Displays the number of frames forwarded by the interface.

[1-12], [13-24], or [25-27](Navigation Key)

When the Switch Statistics screen displays, the statistics are displayed for the first 12 ports. These fields allow the user to step to a second or third screen for the same type of information for ports 13 through 24 or 25 through 27. While on the second or third screen, the user can navigate back to earlier screens by highlighting the [1-12]and/or [13-24]fields and pressing ENTER.

CLEAR COUNTERS (Command)

This command clears all the counters of the ports displayed to zero. To clear the counters, use the arrow keys to highlight CLEAR COUNTERS at the bottom of the screen, then press ENTER.

5.21INTERFACE STATISTICS SCREEN

The Interface Statistics screen, Figure 5-28, is used to gather MIB-II statistics for all the 2E4X-27 interfaces with the exception of an installed HSIM.

NOTE

Cabletron Systems HSIMs gather their own statistics, and may be viewed via the Local Management screens of the applicable HSIM. Refer to your HSIM documentation for information on how to access these screens.

2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-67