5 • Specifications and
5.2Error messages, etc.
NODISC | NO DISC | No disc is inserted in the try— insert a disc or remove and replace the disc already loaded |
|
|
|
ERR 01 | ERROR 1 | No disc— the unit cannot find focus on a disc (after retrying several times) |
|
|
|
Err 02 | ERROR 2 | Unused |
|
|
|
ERR 03 | ERROR 3 | TOC Read error— the disc’s Table of Contents cannot be read within 20 seconds— try with another disc or remove |
|
| and clean the existing disc before replacing it |
|
|
|
ERR 04 | ERROR 4 | GFS error— a GFS error has occurred 3 times within five seconds— try with another disc or remove and clean the |
|
| existing disc before replacing it |
|
|
|
ERR 05 | ERROR 5 | Focus error— after repeating the attempt eight times to focus, an error still occurs— try with another disc or remove |
|
| and clean the existing disc before replacing it |
|
|
|
ERR 06 | ERROR 6 | |
|
|
|
ERR 07 | ERROR 7 | Loading error— the open or close operation cannot be completed, even after retries, or there is an internal error— |
|
| make sure that there are no obstructions preventing the tray’s operation |
|
|
|
ERR 08 | ERROR 8 | Sled error— an internal drive error— try turning the power off, waiting a few seconds, and turning it on again |
|
|
|
Err 09 | ERROR 9 | Error in communication between decks— try turning the unit off, waiting a few seconds, and turning it on again |
|
|
|
If any of the numbered error messages (1 through 9) occur, try using another disc.
If the errors continue with a number of discs, turn the unit off, wait for a few seconds, and turn it on again.
If the errors still continue, contact your TASCAM distributor for repair.
5.2.1Spare parts
The following spare parts are readily available from your TASCAM distributor should the original such parts supplied with your
9260337700 Joint angle
9783243006 Screw for installing Joint angle
9109030600 Remote cable