Toshiba kV-9960A Typical Connection with the Sequential Switcher, Video, To REC TRIGG. OUT

Typical Connection with the Sequential Switcher

When connected with a sequential switcher, set the alarm recording mode to MANUAL by menu screen. For further details, consult the instruction manuals of the connected devices.

ALL CLEAR
IN	ALARM	REMOTE IN
GND
RESET
OUT		MIC IN
GND	.
	EXT CONT
IN
GND	.	IN	VIDEO	OUT
	REC TRIGG
OUT
TAPE END
SEE MANUAL		IN	AUDIO	OUT	SEE MANUAL

To	To VIDEO OUT
VIDEO IN
	To REC TRIGG. OUT

To ALARM IN

To GND

To VCR playback
Frame Sequential Switcher	To VCR REC	To ALARM	To REC TRIGGER INPUT
		OUTPUT

				VIDEO IN					VIDEO OUT			ALARM IN						REMOTE
																		ALARM
				CAMERA				VCR	VCR	1	2	3	4	5	6	7	8	OUT
										MONITOR
1	2	3	4	5	6	7	8	PLAY	REC
																		Monitor TV.
																		AC120V
																		To AC outlet

When using the VCR connected to a frame sequential switcher, pay attention to the following matters.

iWhen playing back in the SPA12, EPA18 or SPA24 mode, mixing of pictures from other channels may occur. If this occurs, play back in a mode other than the SPA12, EPA18 or SPA24 mode.

iIf the following phenomena occur during playback in a time mode of

24hours or longer, adjust by using the TRACKING button.

1.Mixing of signals from another channel.

Go to slow playback and press the TRACKING button to adjust until the picture appears from the channel you want to view.

2.Picture waves up and down.

Press the TRACKING button during still picture playback and

adjust the picture until the picture stops waving up and down.

INTRODUCTION

PREPARATION

RECORDING OPERATION

PLAYBACK OPERATION

NOTICE

12