INTRODUCTION
FEATURES
INTRODUCTION
Various time modes & High Density modes.
With a
The modes are explained in more detail. (See page 21.)
Virtual
It is possible to virtual
Internal
This VCR includes an internal
Menu driven programming simplifies
time & date search, timer setting, and alarm recording.
Timer recording function.
With timer recording, it is possible to set two programs for each day of the week as well as one daily program. Up to 15 programs total are available for timer recording.
(See pages 25 - 28.)
Tape remaining function.
With this feature, it is possible to check the time remaining until the end of tape during the recording process as well as playback process. (See page 6, note w.)
Alarm record function.
With a dry contact closure upon the alarm input terminal, it is possible to set the VCR into alarm mode. When recording in the alarm mode, the VCR automatically enters into a mode which usually is a faster recording mode. This is done so that more information can be recorded.
Auto record function.
While in the timer record or timer standby mode, this unit can automatically begin recording when a dry contact closure is applied across the external control input and ground terminals.
Alarm memory search function.
This VCR provides an alarm memory function for finding the alarm event during playback. (See page 43.)
Repeat record function.
Repeat record function enables the VCR to automatically rewind the tape when it reaches the end and restarts the recording process. (See page 36.)
Restart record function.
This function enables the VCR to automatically restart the record- ing process in the event of a power failure. After power is restored, the VCR will restart the recording process. (See page 24.)
Shuttle function.
With the shuttle dial, a wide variety of playback functions are available. They include picture search, slow playback, field advance playback, reverse field advance playback, and still playback (See pages 40 - 41.)
Clean slow and still.
A clean crisp image is crucial and is the main purpose for the existence of a surveillance recorder. This VCR offers a clean and noiseless playback, that is essential for surveillance applications. (Pay attention to page 39.)
Time date search function.
With time date search, it is possible to search for a picture recorded on a certain time and date. (See page 42.)
Head cleaning function.
Head cleaning is automatically performed at the end of timer recording and at tape end in order to prevent head jamming. There is also head cleaning once every two hours when operating in time modes of 24 hours or more.
Automatic head clog detection.
When recording in time mode SP120 ~ SP960 and EP480 ~ EP960, video head clog detection is automatically carried out once for every two hours. When the video head clog is found, head cleaning is carried out for approximately 10 times. When cleaning is still not possible,
Record check function.
By pressing the record check button during recording, the VCR automatically replays the last few seconds of the recording. (See page 5, note 2).
Wired remote control function (Option)
The wired remote control allows the following VCR functions.
• Fast Forward | • Forward picture search |
• Rewind | • Reverse picture search |
• Pause | • Still |
• Field advance (forward, reverse) | |
• Play | • Stop |
• Play back time |
|
PREPARATION
RECORDING | OPERATION |
TABLE OF CONTENTS
PLEASE READ | 1 | RESTART RECORDING | 24 |
IMPORTANT PRECAUTIONS | 1 | TIMER RECORDING | 25 |
IMPORTANT SAFETY INSTRUCTIONS | 2 ~ 3 | ALARM RECORDING | 29 |
INTRODUCTION | 4 ~ 10 | AUTO RECORDING | 32 |
FEATURES | 4 | OPERATION AFTER TAPE END DETECTION | 34 |
TABLE OF CONTENTS | 4 | HOW TO SET TO AUTO REWIND AT END OF TAPE | 35 |
INSTRUCTIONS IN BRIEF | 5 | HOW TO SET TO REPEAT RECORD AT END OF TAPE | 36 |
VCR DISPLAY | 9 | RECORDING WITH THE SEQUENTIAL SWITCHER | 37 |
WIRED REMOTE CONTROL (Option) | 10 | PLAYBACK OPERATION | 39 ~ 43 |
PREPARATION | 11 ~ 22 | PLAYBACK | 39 |
CONNECTIONS | 11 | PLAYBACK IN VARIOUS MODES | 41 |
CONTENTS OF SCREEN DISPLAY | 13 | TIME DATE SEARCH | 42 |
SETTING THE CLOCK | 15 | ALARM SEARCH | 43 |
16 | NOTICE | 44 ~ 50 | |
DISPLAY SCREEN | 17 | SIGNAL LEVELS OF INPUT/OUTPUT TERMINALS | 44 |
COUNTER DISPLAYS | 19 | DAILY AND PERIODIC INSPECTION | 45 |
SETTING THE RECORDING/PLAYBACK TIME | 21 | CAUTIONS DURING USE | 47 |
LOADING AND UNLOADING A VIDEO CASSETTE | 22 | BEFORE CALLING SERVICE PERSONNEL | 48 |
RECORDING OPERATION | 23 ~ 38 | SPECIFICATIONS | 50 |
RECORDING | 23 |
|
|
NOTICE
4
