How to Release Auto Recording | Toshiba kV-9960A guide

INTRODUCTION

Press the + or – SET

5 button to set the auto recording time mode.

DISPLAY	– TIME MODE +
	SET
	SHIFT	TRACKING
	SHIFT
		LOCATION SELECT

PROGRAM FR1 ON --:-- ➜ --:-- SP120 FR2 ON --:-- ➜ --:-- SP120 SA1 ON --:-- ➜ --:-- SP120 SA2 ON --:-- ➜ --:-- SP120 SU1 ON --:-- ➜ --:-- SP120 SU2 ON --:-- ➜ --:-- SP120 DLY ON --:-- ➜ --:-- SP120

EXT ON		SP 24
	MENU=[DISPLAY]

Press the TIMER button to set the timer recording or

7 timer standby mode.

PREPARATION

Press the DISPLAY

6 buttondisplay.twice to erase the

DISPLAY – TIME MODE +

SET

SHIFT	TRACKING
SHIFT
	LOCATION SELECT

8/28/97 THU 17:30:02 SPA 2

Turn on the auto recording switch on .

8 While switch is on, recording is available.

ON

To external control input

To GND

RECORDING

OPERATION

PLAYBACK	OPERATION

NOTICE

How to Release Auto Recording

Press TIMER button to release the timer mode.

How to Forbid Auto Recording

PROGRAM

FR1 ON --:-- ➜ --:-- SP120

FR2 ON --:-- ➜ --:-- SP120

SA1 ON --:-- ➜ --:-- SP120

SA2 ON --:-- ➜ --:-- SP120

SU1 ON --:-- ➜ --:-- SP120

SU2 ON --:-- ➜ --:-- SP120

DLY ON --:-- ➜ --:-- SP120

EXT	SKIP	SP120
		MENU=[DISPLAY]

Notes:

iAuto Recording is available only at the timer mode (timer recording, timer standby).

iWhen Timer Recording coincides with Auto Recording, Auto Recording will take priority.

33

Image 34

Toshiba kV-9960A instruction manual How to Release Auto Recording, How to Forbid Auto Recording, Press the + or SET

Contents

Instruction Manual Important Precautions Please Read Radiators, heat registers, stoves Important Safety InstructionsPower Sources Unplug this product from the wall When the power-supply cord or plug is damaged AccessoriesPower Lines To restore the product to its normal operation Features Table of Contents Instructions in Brief Front Panel Cassette Compartment Time Mode / SET + buttonsTape Remain button Display button Rear Panel Installation Word on the Exclusive 3N-100AAS Battery PackSpecification of Battery Removal VCR Display Press to start play back REW buttonFF button Connections Connection with a Video Camera To REC TRIGG. OUT Typical Connection with the Sequential SwitcherVideo Output Contents of Screen Display Alarm Recall Screen Setting the Clock Operation VCR display ON-SCREEN FunctionsDate-Time Display Monitor screen Display Screen Changes to the alarm number Alarm numberIs pressed. When an alarm is This function enables to indicate and record information Counter Displays Alarm MemoryWhen the tape reaches Counter Memory Tape Remain Error MessageRegarding the error code E-6 Display Code Number Condition of Abnormality HOW to Operate 24 Hour Virtual Real Time Mode Setting the RECORDING/PLAY Back TimeMode display Loading a Cassette Loading and Unloading a Video CassetteUnloading a Cassette Recording Camera and monitor TV Not been removed Setting the Restart Recording Restart Recording Daily Timer Recording Timer RecordingSetting the Timer Program Program Screen Should be more than 1 minute. If they are same, timer Time Mode button is pressed, the displayPress the Timer button During timer power off mode, alarm recording will not Press the Shift ButtonGRAM.to blink PRO Weekly Timer RecordingPress the Shift Button to blink the MO1 start time FR2 Overlapping ProgramsExample DLY Alarm Recall Display Alarm RecordingOperation at Alarm Input Event Recording Connecting the Alarm Terminals Cont Setting the Alarm RecordingDisplay Recording time Manual Operation of Auto Recording Connecting the External control terminalAuto Recording Auto recording Press Timer button to release the timer mode How to Release Auto RecordingHow to Forbid Auto Recording Press the + or SET Operation After Tape END Detection How to Set to Stop at End of TapeSetting contents Buzzer Screen display Counter display Display Operation after detection of tape end Alarm recording does not operate during auto-rewind How to Set to Auto Rewind at End of TapeMenu Screen How to Set to Repeat Record at End of Tape ButtonREC. to select REW → Timing for Camera Switching Recording with the Sequential SwitcherConnection with the Sequential Switcher C D a B C D Button to set the REC REC Trigger Output Selection in the Alarm RecordingPress the Shift Trigger SEL Recording time mode Time mode for playback Tracking AdjustmentPlayback Picture Search Play Using the Shuttle DialREW Stop Slow Still Play Playback in Various Modes Search Operation Time Date SearchPress the SET button to Set the Minute to Alarm M to light Alarm SearchStill picture mode Press the Play button Signal Levels of INPUT/OUTPUT Terminals Input/Output terminal Signal level Additional remarks Daily and Periodic Inspection Check the playback picture recorded in SPA2 modePress the or Time Mode button to go to SPA2 mode Order of Daily Checks Request for Periodic Checks Steps to Take after Daily ChecksTape Usage Frequency Dew Condensation Function/Operation Before Calling Service PersonnelInstallation Recording Playback Other matters Accessories SpecificationsConnector section Dew caution sheet Limited Warranty 70971826