Toshiba kV-9960A Word on the Exclusive 3N-100AAS Battery Pack, Specification of Battery, Removal

A Word on the Exclusive 3N-100AAS Battery Pack

The nickel-cadmium battery pack (3N-100AAS) is used for power source of the built-in clock and memory circuit.

Charging the Battery Pack

1.Turn on the power of the VCR.

2.The battery pack in the VCR is charged.

Battery Installation

Removal:

1.Remove the battery cover.

2.Disconnect the connector in the VCR.

RED wire

Connector

Battery pack

Installation:

1.Install the battery pack placing the red wire upside, and connect the connector on the battery pack to this VCR. Make sure the polarities (+) and (–) are correct.

2.Close the battery cover.

Note:

If the Battery Pack is removed, the memory data will be erased. In such a case, perform the setting from the first step.

Specification of Battery

i	Temperature
	For charging	:	0°C to 80°C
	For operating	:	–20°C to 80°C
	For storing	:	–30°C to 80°C
i	Charging time	:	more than 48 hours

Notes:

iUse only for this VCR.

iDo not dispose of the batteries into fire.

iDo not short circuit the terminals.

iDo not modify or disassemble.

iAvoid dropping, unnecessary shocks.

INTRODUCTION

PREPARATION

RECORDING OPERATION

PLAYBACK OPERATION

NOTICE

8