Daily and Periodic Inspection | Toshiba kV-9960A instruction

INTRODUCTION

DAILY AND PERIODIC INSPECTION

This VCR has been designed to stand the use over long periods. Nevertheless, we recommend you to carry out regular daily inspection to insure problem-free use.

Note:

It is particularly important to carry out daily checks when using the VCR for repeat recording.

PREPARATION

RECORDING	OPERATION

PLAYBACK

OPERATION

Order of Daily Checks

Turn the power ON for this VCR and for the connected

1 devices in the surveillance system including the video camera and monitor TV.

2 Does the correct picture appear in the monitor TV?

1 2 3

3 Is the date-time display correct on the monitor TV?

8/28/97 THU 17:30:06SPA 2

						1	2	3

Rewind the tape several digits on the section you

4 recorded the previous day.

6 Press the PLAY button.

PLAY

STOP

Is the playback picture normal?

7 Isandtheretime?anything abnormal about the recorded date

8 Press the REC button.

REC

9 Check the playback picture recorded in SPA2 mode.

REV

FWD

NOTICE

Press the or TIME MODE button to go to the

5 SPA2 mode.

H

– TIME MODE +	REC	SP
– TIME MODE +		SP
SET

After checking these matters change to the mode you

10want to set to.

45

Image 46

Toshiba kV-9960A Daily and Periodic Inspection, Order of Daily Checks, Check the playback picture recorded in SPA2 mode

Contents

Instruction Manual Important Precautions Please Read Radiators, heat registers, stoves Important Safety InstructionsPower Sources Unplug this product from the wall When the power-supply cord or plug is damaged AccessoriesPower Lines To restore the product to its normal operation Features Table of Contents Instructions in Brief Front Panel Cassette Compartment Time Mode / SET + buttonsTape Remain button Display button Rear Panel Installation Word on the Exclusive 3N-100AAS Battery PackSpecification of Battery Removal VCR Display Press to start play back REW buttonFF button Connections Connection with a Video Camera To REC TRIGG. OUT Typical Connection with the Sequential SwitcherVideo Output Contents of Screen Display Alarm Recall Screen Setting the Clock Operation VCR display ON-SCREEN FunctionsDate-Time Display Monitor screen Display Screen Changes to the alarm number Alarm numberIs pressed. When an alarm is This function enables to indicate and record information Counter Displays Alarm MemoryWhen the tape reaches Counter Memory Tape Remain Error MessageRegarding the error code E-6 Display Code Number Condition of Abnormality HOW to Operate 24 Hour Virtual Real Time Mode Setting the RECORDING/PLAY Back TimeMode display Loading a Cassette Loading and Unloading a Video CassetteUnloading a Cassette Recording Camera and monitor TV Not been removed Setting the Restart Recording Restart Recording Daily Timer Recording Timer RecordingSetting the Timer Program Program Screen Should be more than 1 minute. If they are same, timer Time Mode button is pressed, the displayPress the Timer button During timer power off mode, alarm recording will not Press the Shift ButtonGRAM.to blink PRO Weekly Timer RecordingPress the Shift Button to blink the MO1 start time FR2 Overlapping ProgramsExample DLY Alarm Recall Display Alarm RecordingOperation at Alarm Input Event Recording Connecting the Alarm Terminals Cont Setting the Alarm RecordingDisplay Recording time Manual Operation of Auto Recording Connecting the External control terminalAuto Recording Auto recording Press Timer button to release the timer mode How to Release Auto RecordingHow to Forbid Auto Recording Press the + or SET Operation After Tape END Detection How to Set to Stop at End of TapeSetting contents Buzzer Screen display Counter display Display Operation after detection of tape end Alarm recording does not operate during auto-rewind How to Set to Auto Rewind at End of TapeMenu Screen How to Set to Repeat Record at End of Tape ButtonREC. to select REW → Timing for Camera Switching Recording with the Sequential SwitcherConnection with the Sequential Switcher C D a B C D Button to set the REC REC Trigger Output Selection in the Alarm RecordingPress the Shift Trigger SEL Recording time mode Time mode for playback Tracking AdjustmentPlayback Picture Search Play Using the Shuttle DialREW Stop Slow Still Play Playback in Various Modes Search Operation Time Date SearchPress the SET button to Set the Minute to Alarm M to light Alarm SearchStill picture mode Press the Play button Signal Levels of INPUT/OUTPUT Terminals Input/Output terminal Signal level Additional remarks Daily and Periodic Inspection Check the playback picture recorded in SPA2 modePress the or Time Mode button to go to SPA2 mode Order of Daily Checks Request for Periodic Checks Steps to Take after Daily ChecksTape Usage Frequency Dew Condensation Function/Operation Before Calling Service PersonnelInstallation Recording Playback Other matters Accessories SpecificationsConnector section Dew caution sheet Limited Warranty 70971826