Toshiba kV-9960A Time Mode button is pressed, the display, Changes in the reverse direction

Press the + or – SET

6 button and the SHIFT button to set start time to 8:30.

DISPLAY	– TIME MODE +
	SET
	SHIFT	TRACKING
		LOCATION SELECT

PROGRAM FR1 ON --:-- ➜ --:-- SP120 FR2 ON --:-- ➜ --:-- SP120 SA1 ON --:-- ➜ --:-- SP120 SA2 ON --:-- ➜ --:-- SP120 SU1 ON --:-- ➜ --:-- SP120 SU2 ON --:-- ➜ --:-- SP120

DLY	ON	8:-- ➜ --:-- SP120
EXT	ON		SP120
			MENU=[DISPLAY]

PROGRAM FR1 ON --:-- ➜ --:-- SP120 FR2 ON --:-- ➜ --:-- SP120 SA1 ON --:-- ➜ --:-- SP120 SA2 ON --:-- ➜ --:-- SP120 SU1 ON --:-- ➜ --:-- SP120 SU2 ON --:-- ➜ --:-- SP120

DLY	ON	8:30 ➜ --:-- SP120
EXT	ON	SP120
		MENU=[DISPLAY]

i	The TIME MODE button is pressed, the display			INTRODUCTION
	changes as follows.
	SP120 → 120 → SP168 →		168 → SP240 → 240 →
	SP480 → 480 → SP720 → 720 →SP960 → 960 →
	SPL01 → SPL02 → SPL03 → SPA2 → A6 → SPA12 →
	A18 → SPA24 → SP24 → 30 → SP48 → 48 → SP72 →
	72 → SP120
i	The TIME MODE button is pressed, the display			PREPARATION
	changes in the reverse direction.
	Press the DISPLAY
	button twice to erase the
9 MENU screen.
	DISPLAY – TIME MODE +
	SET
	SHIFT	TRACKING	8/28/97 THU
	LOCATION SELECT		17:30:02SPA 2

Press the SHIFT

7 button to blink end time. Set end time to 17:00 with the SET button and the SHIFT button in the same manner as 6.

DISPLAY – TIME MODE +

PROGRAM FR1 ON --:-- ➜ --:-- SP120 FR2 ON --:-- ➜ --:-- SP120 SA1 ON --:-- ➜ --:-- SP120 SA2 ON --:-- ➜ --:-- SP120 SU1 ON --:-- ➜ --:-- SP120 SU2 ON --:-- ➜ --:-- SP120

DLY	ON	8:30 ➜ 17:30 SP120
EXT	ON	SP120
		MENU=[DISPLAY]

10	Press the TIMER button.
	TIMER		H	RECORDING OPERATION
	REC	SP
		TIMER
i The power goes off and the TIMER display lights in the
VCR display.
i Recording starts at the programmed start time.

SET

SHIFT

TRACKING

PROGRAM

Notes:

LOCATION SELECT

FR1 ON --:-- ➜ --:-- SP120

FR2 ON --:-- ➜ --:-- SP120

SA1 ON --:-- ➜ --:-- SP120

SA2 ON --:-- ➜ --:-- SP120

SU1 ON --:-- ➜ --:-- SP120

SU2 ON --:-- ➜ --:-- SP120

DLY	ON	8:30 ➜ 17:00 SP120
EXT	ON		SP120
		MENU=[DISPLAY]

i If the TIMER button is pressed at the moment between
start time and end time, recording starts immediately.
i To cancel the timer recording, press the TIMER button.
i The timer recording starts 10 seconds before the record	PLAYBACK OPERATION
start time.
i When the end time is set to a time earlier than the start time, the
recording is carried out up to the end time in the next day.

Press the SHIFT

8 button and the + SET button to set recording time mode to SPA24.

DISPLAY – TIME MODE +

PROGRAM FR1 ON --:-- ➜ --:-- SP120 FR2 ON --:-- ➜ --:-- SP120 SA1 ON --:-- ➜ --:-- SP120 SA2 ON --:-- ➜ --:-- SP120 SU1 ON --:-- ➜ --:-- SP120 SU2 ON --:-- ➜ --:-- SP120

i The time difference between start time and end time

should be more than 1 minute. If they are same, timer

recording doesn’t work.

i The accuracy of the time display depends on the condi-

tions of use and the environment. Set clock to the exact

time by daily check.

SET

SHIFT

TRACKING

DLY ON	8:30 ➜ 17:00 SPA24
EXT ON	SP120
	MENU=[DISPLAY]

i During timer power off mode, alarm recording will not

LOCATION SELECT

IF A POWER FAILURE SHOULD OCCUR

iIf a power failure occurs, the PW.FAIL display appears in the VCR display. To erase this display press one of the operations buttons.

iIf the power failure is recovered within 10 days, and the battery is charged continuously for more than 48 hours in the ambient temperature, the date/time data and timer recording programs remain in the memory.

operate at all.
During the 12 hour display, the display appears as follows.			NOTICE
	PROGRAM
	FR1 ON -:--- ➜ -:--- SP120
	FR2 ON -:--- ➜ -:--- SP120
	SA1 ON -:--- ➜ -:--- SP120
	SA2 ON -:--- ➜ -:--- SP120
	SU1 ON -:--- ➜ -:--- SP120
	SU2 ON -:--- ➜ -:--- SP120
	DLY ON 8:30AM ➜ 5:00PM	SPA24
	EXT ON	SP120
	MENU=[DISPLAY]

26