switchport unicast all packet-rate {1 2 3 4}
1 - Threshold level represents 64 pps for 1G Port or 1042 pps for 10G port. 2 - Threshold level represents 128 pps for 1G Port or 2084 pps for 10G port. 3 - Threshold level represents 256 pps for 1G Port or 3124 pps for 10G port. 4 - Threshold level represents 512 pps for 1G Port or 4167 pps for 10G port. all - This command represents all interfaces.
Note: pps (packet per second)
Default Setting
Level 4
Command Mode
Global Config
5.2.8L2 Priority
5.2.8.1show queue cos-map
This command displays the class of service priority map on specific interface.
Syntax
show queue cos-map [<slot/port>]
<slot/port> - Interface number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
User Priority: Displays the 802.1p priority to be mapped.
Traffic Class: Displays internal traffic class to map the corresponding 802.1p priority.
122
