
Resetting the Passwords to Default Values Page
Command Buttons
Reset - Select this button to have all passwords reset to their factory default values.
Downloading Specific Files to Switch Flash Page
Use this menu to download a file to the switch.
Configurable Data
File Type - Specify what type of file you want to download:
Script - specify configuration script when you want to update the switch's script file.
CLI Banner - Specify the banner that you want to display before user login to the switch. Code – Specify code when you want to upgrade the operational flash.
Configuration - Specify configuration when you want to update the switch's configuration. If the file has errors the update will be stopped.
SSL DH Weak Encryption Parameter PEM File - SSL
SSL DH Strong Encryption Parameter PEM File - SSL
The factory default is code.
Note that to download SSH key files SSH must be administratively disabled and there can be no active SSH sessions.
TFTP Server IP Address - Enter the IP address of the TFTP server. The factory default is 0.0.0.0.
TFTP File Path (Target) - Enter the path on the TFTP server where the selected file is located. You may enter up to 32 characters. The factory default is blank.
TFTP File Name (Source) - Enter the name on the TFTP server of the file you want to download. You may enter up to 32 characters. The factory default is blank.
TFTP File Name (Target) - Enter the name on the switch of the file you want to save. You may enter up to 32 characters. The factory default is blank.
465