6.3.2.11area nssa translator-stab-intv

This command configures the translator stability interval of the NSSA. The <stabilityinterval> is the period of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router.

Syntax

area <areaid> nssa translator-stab-intv <0-3600>

<areaid> - Area ID.

<0-3600> - The range is 0 to 3600.

Default Setting

None

Command Mode

Router OSPF Config

6.3.2.12area range

This command creates a specified area range for a specified NSSA.

Syntax

area <areaid> range <ipaddr> <subnetmask> {summarylink nssaexternallink} [advertise not-advertise]

no area <areaid> range <ipaddr> <subnetmask>

<areaid> - Area ID. <ipaddr> - IP Address. <subnetmask> - The subnetmask.

summarylink - The lsdb type. The value is summarylink or nssaexternallink nssaexternallink - The lsdb type. The value is summarylink or nssaexternallink advertise - Allow advertising the specified area range.

not-advertise - Disallow advertising the specified area range.

<no> - This command deletes a specified area range.

Default Setting

None

Command Mode

331

Page 331
Image 331
Fortinet MR1 manual Area nssa translator-stab-intv, Area range, Syntax Area areaid nssa translator-stab-intv Areaid Area ID