Fortinet MR1 manual Show ip igmp groups, Syntax show ip igmp Default Setting

7.2 Internet Group Management Protocol (IGMP) Commands

This section provides a detailed explanation of the IGMP commands. The commands are divided into the following different groups:

Show commands are used to display device settings, statistics and other information. Configuration commands are used to configure features and options of the switch. For every configuration command there is a show command that will display the configuration setting.

7.2.1Show Commands

7.2.1.1show ip igmp

This command displays the system-wide IGMP information.

Syntax show ip igmp

Default Setting

None

Command Mode

Privileged Exec

User EXEC

Display Message

IGMP Admin Mode This field displays the administrative status of IGMP. This is a configured value.

Interface Valid slot and port number separated by a forward slash.

Interface Mode This field indicates whether IGMP is enabled or disabled on the interface. This is a configured value.

Protocol State This field indicates the current state of IGMP on this interface. Possible values are Operational or Non-Operational.

7.2.1.2show ip igmp groups

This command displays the registered multicast groups on the interface. If “detail” is specified this command displays the registered multicast groups on the interface in detail.

Syntax

385