Fortinet MR1 manual Configuring Command Logger, Configuring Console Log

Configuring Command Logger Page

Configurable Data

Admin Mode - Enable/Disable the operation of the CLI Command logging by selecting the corresponding pulldown field and clicking Submit.

Command Buttons

Submit - Update the switch with the values you entered.

Configuring Console Log Page

This allows logging to any serial device attached to the host.

Configurable Data

Admin Status -A log that is "Disabled" shall not log messages. A log that is "Enabled" shall log messages. Enable or Disable logging by selecting the corresponding line on the pulldown entry field.

Severity Filter - A log records messages equal to or above a configured severity threshold. Select the severity option by selecting the corresponding line on the pulldown entry field. These severity levels have been enumerated below:

-Emergency (0): system is unusable

-Alert (1): action must be taken immediately

-Critical (2): critical conditions

-Error (3): error conditions

-Warning (4): warning conditions

-Notice(5): normal but significant conditions

-Informational(6): informational messages

-Debug(7): debug-level messages

Command Buttons

Submit - Update the switch with the values you entered.

441