Fortinet MR1 Show ip ospf, Restrictions, Syntax show ip ospf Default Setting, Display Messages

The default value is ethernet.

Command Mode

Interface Config

Restrictions

Routed frames are always Ethernet encapsulated when a frame is routed to a VLAN.

6.3Open Shortest Path First (OSPF) Commands

6.3.1Show Commands

6.3.1.1show ip ospf

This command displays information relevant to the OSPF router

Syntax show ip ospf

Default Setting

None

Command Mode

Privileged Exec

Display Messages

Router ID Is a 32 bit integer in dotted decimal format identifying the router. OSPF Admin Mode The administrative mode of OSPF in the router.

ASBR Mode Reflects whether the ASBR mode is enabled or disabled. Enable implies that the router is an autonomous system border router. Router automatically becomes an ASBR when it is configured to redistribute routes learned from other protocol. The possible

values for the ASBR status is enabled (if the router is configured to re-distribute routes learnt by other protocols) or disabled (if the router is not configured for the same).

RFC 1583 Compatibility Reflects whether 1583 compatibility is enabled or disabled. This is a configured value.

ABR Status Reflects the whether or not the router is an OSPF Area Border Router.

Exit Overflow Interval The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState.

External LSA count The number of external (LS type 5) link-state advertisements in the link-state database.

317