The value of local indicates that the user’s locally stored ID and password are used for authentication. The value of radius indicates that the user’s ID and password will be authenticated using the RADIUS server. The value of reject indicates that the user is never authenticated. The value of tacacs indicates that the user’s ID and password will be authenticated using the TACACS.
To authenticate a user, the authentication methods in the user’s login will be attempted in order until an authentication attempt succeeds or fails.
Note that the default login list included with the default configuration cannot be changed.
Syntax
authentication login <listname> [<method1>] [<method2>] [<method3>] no authentication login <listname>
<listname> - creates an authentication login list (Range: up to 15 characters). <method1 - 3> - The possible method values are local, radius, reject, and tacacs.
no - This command deletes the specified authentication login list. The attempt to delete will fail if any of the following conditions are true:
1.The login list name is invalid or does not match an existing authentication login list
2.The specified authentication login list is assigned to any user or to the nonconfigured user for any component.
3.The login list is the default login list included with the default configuration and was not created using ‘config authentication login create’. The default login list cannot be deleted.
Default Setting
None
Command Mode
Global Config
5.8.2.2username defaultlogin
This command assigns the authentication login list to use for
Syntax
username defaultlogin <listname>
206
