Fortinet MR1 manual Syntax Show ip pimsm rphash group-address

<group-mask > - the multicast group address mask.

candidate - this command display PIM-SM candidate-RP table information. all - this command display all group addresses.

Default Setting

None

Command Mode

Privileged Exec

Display Message

Group Address: This field specifies the IP multicast group address.

Group Mask: This field specifies the multicast group address subnet mask.

Address: This field displays the IP address of the Candidate-RP.

Hold Time: This field displays the hold time of a Candidate-RP.

Expiry Time: This field displays the minimum time remaining before the Candidate-RP will be declared down.

Component: This field displays a number which uniquely identifies the component. Each protocol instance connected to a separate domain should have a different index value.

If the “candidate” parameter is specified the follow fields are displayed:

Group Address: This field specifies the IP multicast group address.

Group Mask: This field specifies the multicast group address subnet mask.

Address: This field displays the IP address of the Candidate-RP.

7.5.1.7show ip pimsm rphash

This command displays the RP router that will be selected from the set of active RP routers. The RP router, for the group, is selected by using the hash algorithm defined in RFC 2362.

Syntax

show ip pimsm rphash <group-address>

<group-address > - the IP multicast group address.

Default Setting

None

Command Mode

Privileged Exec

Display Message

IP Address: This field displays the IP address of the RP.

414