![](/images/new-backgrounds/1299835/2998351265x1.webp)
Viewing Mtrace Summary Page
This screen displays the results of an mtrace command. The mtrace command is used to trace the path from source to a destination branch for a multicast distribution tree.
Non-Configurable Data
Number of hops away from destination - The number of hops away from the destination.
IP address of intermediate router - The IP address of the intermediate router in the path being traced between source and destination for the hop number in the previous field.
Multicast Protocol in use - The multicast protocol in use on this hop. TTL Threshold - The
Time taken to forward between hops - The time taken for the trace request to be forwarded from the previous hop to this hop.
Command Buttons
New Mtrace - Redirect the web browser to the Mtrace Run screen so that you can initiate another mtrace command.
Refresh - Refresh the content of the screen with the latest data available on the router. Typically, it takes around 20 seconds to process the results after initiating mtrace command. You must refresh the screen to display the latest results.
8.2.6.5Managing PIM-DM Protocol
Configuring PIM-DM Global Admin Configuration Page
Configurable Data
Admin Mode - Select enable or disable from the pulldown menu to set the administrative status of
Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect immediately. These changes will not be retained across a power cycle unless a save is performed.
633