Fortinet MR1 manual Configuring PIM-SM Static RP Configuration, Configurable Data

Group Address - The group address transmitted in Candidate-RP-Advertisements.

Group Mask - The group address mask transmitted in Candidate-RP-Advertisements to fully identify the scope of the group which the router will support if elected as a Rendezvous Point.

Address - Displays the unicast address of the interface which will be advertised as a Candidate RP.

Command Buttons

Refresh - Refresh the data on the screen with the present state of the data in the router.

Configuring PIM-SM Static RP Configuration Page

Configurable Data

IP Address - IP Address of the RP to be created or deleted.

Group - Group Address of the RP to be created or deleted.

Group Mask - Group Mask of the RP to be created or deleted.

Command Buttons

Submit - Attempts to create the specified static RP IP Address for the PIM-SM router. Configuration changes take effect immediately. These changes will not be retained across a power cycle unless a save is performed.

Delete - Attempts to remove the specified static RP IP Address for the PIM-SM router. Configuration changes take effect immediately. These changes will not be retained across a power cycle unless a save is performed.

640