Fortinet MR1 manual Syntax Ip filter no ip filter, Syntax Ip filter ipaddr no ip filter ipaddr

<dhcp> - Obtains IP address from DHCP.

<none> - Obtains IP address by setting configuration.

Default Setting

None

Command Mode

Interface-Vlan Config

5.3.1.9ip filter

This command is used to enable the IP filter function.

Syntax

ip filter no ip filter

no – Disable ip filter.

Default Setting

Disabled

Command Mode

Global Config

This command is used to set an IP address to be a filter.

Syntax

ip filter <ipaddr> no ip filter <ipaddr>

<ipaddr> - Configure a IP address to be a filter. No - Remove this filter IP address.

130