Translator Stability Interval - Enter the translator stability interval of the NSSA. The stability interval is the period of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router. Valid values range from 0 to 3600.
Non-Configurable Data
Area ID - The OSPF area. An Area ID is a 32 bit integer in dotted decimal format that uniquely identifies the area to which a router interface connects.
Aging Interval - The Link State Advertisement (LSA) aging timer interval.
External Routing - A definition of the router's capabilities for the area, including whether or not
Import External LSAs - Import and propagate external LSAs
Import No LSAs - Do not import and propagate external LSAs
Authentication Type
Currently set to 'None'.
SPF Runs - The number of times that the
Area Border Router Count - The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
Area LSA Count - The total number of
Area LSA Checksum - The
Mode - This field tells you whether the area is or is not a stub area. If the area may be a stub area, a 'Create Stub Area' button will be displayed. If you have configured the area as a stub area a 'Delete Stub Area' button will be displayed. Otherwise neither button will be displayed.
Type of Service - The type of service associated with the stub metric. The switch supports Normal only.
Translator Status - The field tells you the translator is enabled or disabled.
Command Buttons
Create Stub Area - Configure the area as a stub area.
528