Fortinet MR1 manual Configuration Commands, Mac access-list extended

ACL Type This displays ACL type is IP or MAC. ACL ID This displays the ACL ID.

Sequence Number This indicates the order of this access list relative to other access lists already assigned to this interface and direction. A lower number indicates higher precedence order.

5.13.2Configuration Commands

5.13.2.1mac access-list extended

This command creates a MAC Access Control List (ACL) identified by <name>, consisting of classification fields defined for the Layer 2 header of an Ethernet frame. The <name> parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the MAC access list. If a MAC ACL by this name already exists, this command enters Mac-Access-List config mode to allow updating the existing ACL.

Syntax

mac access-list extended <name> no mac access-list extended <name>

<name> - It uniquely identifies the MAC access list.

Default Setting

None

Command Mode

Global Config

5.13.2.2mac access-list extended

This command changes the name of a MAC Access Control List (ACL). The <name> parameter is the name of an existing MAC ACL. The <newname> parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the MAC access list. This command fails if a MAC ACL by the name <newname> already exists.

284