Resetting VLAN Configuration Page
Command Buttons
Reset - If you select this button and confirm your selection on the next screen, all VLAN configuration parameters will be reset to their factory default values. Also, all VLANs, except for the default VLAN, will be deleted. The factory default values are:
zAll ports are assigned to the default VLAN of 1.
zAll ports are configured with a PVID of 1.
zAll ports are configured to an Acceptable Frame Types value of Admit All Frames.
zAll ports are configured with Ingress Filtering disabled.
zAll ports are configured to transmit only untagged frames.
zGVRP is disabled on all ports and all dynamic entries are cleared.
zGVRP is disabled for the switch and all dynamic entries are cleared.
zGMRP is disabled on all ports and all dynamic entries are cleared.
zGMRP is disabled for the switch and all dynamic entries are cleared.
485
