5.1.4show running-config
This command is used to display/capture the current setting of different protocol packages supported on switch. This command displays/captures only commands with settings/configurations with values that differ from the default value. The output is displayed in script format, which can be used to configure another switch with the same configuration. When a script name is provided, the output is redirected to a configuration script. The option [all] will also enable the display/capture of all commands with settings/configurations that include values that are same as the default values. If the optional <scriptname> is provided with a file name extension of “.scr”, the output will be redirected to a script file.
Syntax
show running-config [all] [<scriptname>]
[all] - enable the display/capture of all commands with settings/configurations that include values that are same as the default values.
<scriptname> - redirect the output to the file <scriptname>.
Default Setting
None
Command Mode
Privileged Exec
5.1.5show sysinfo
This command displays switch brief information and MIBs supported.
Syntax show sysinfo
Default Setting
None
Command Mode
51
