Fortinet MR1 manual Area virtual-link hello-interval

Syntax

area <areaid> virtual-link <neighborid> dead-interval <1-65535> no area <areaid> virtual-link <neighborid> dead-interval

<areaid> - Area ID.

<neighbor> - Router ID of the neighbor.

<1-65535> - The range of the dead interval is 1 to 65535.

<no> - This command deletes the OSPF virtual interface from the given interface, identified by <areaid> and <neighborid>.

Default Setting

The default value of dead interval is 40 seconds.

Command Mode

Router OSPF Config

6.3.2.17area virtual-link hello-interval

This command configures the hello interval for the OSPF virtual interface on the interface identified by <areaid> and <neighborid>.

Syntax

area <areaid> virtual-link <neighborid> hello-interval <1-65535> no area <areaid> virtual-link <neighborid> hello-interval

<areaid> - Area ID.

<neighborid> - Router ID of the neighbor.

<1-65535> - The range of the hello interval is 1 to 65535.

<no> - This command configures the default hello interval for the OSPF virtual interface on the interface identified by <areaid> and <neighborid>.

Default Setting

The default value of hello interval is 10 seconds.

Command Mode

Router OSPF Config

334