Fortinet MR1 manual Dhcp Relay Commands, Show bootpdhcprelay, No ip dhcp client-identifier

no ip dhcp client-identifier

<text> - A text string. (Range: 1-15 characters). <hex> - The hexadecimal value (00:00:00:00:00:00). no - This command is used to restore to default value.

Default Setting

System Burned In MAC Address

Command Mode

Global Config

5.3.9DHCP Relay Commands

5.3.9.1Show bootpdhcprelay

This command is used to display the DHCP relay agent configuration information on the system.

Syntax

show bootpdhcprelay

Default Setting

None

Command Mode

Privileged Exec

Display Message

Maximum Hop Count - The maximum number of Hops a client request can go without being discarded.

Minimum Wait Time (Seconds) - The Minimum time in seconds. This value will be compared to the time stamp in the client's request packets, which should represent the time since the client was powered up. Packets will only be forwarded when the time stamp exceeds the minimum wait time.

Admin Mode - Administrative mode of the relay. When you select 'enable' BOOTP/DHCP requests will be forwarded to the IP address you entered in the 'Server IP address' field.

162