Fortinet MR1 manual Storm-control flowcontrol

no capabilities {{10 100 } {full-duplex half-duplex}} {1000 full-duplex }

10 - 10BASE-T

100 - 100BASE-T

1000 - 1000BASE-T full-duplex - Full duplex half-duplex - Half duplex

no - This command removes the advertised capability with using parameter.

Default Setting

10 half-duplex, 10 full-duplex, 100 half-duplex, 100 full-duplex, and 1000 full-duplex

Command Mode

Interface Config

This command is used to set the capabilities on all interfaces.

Syntax

capabilities all {{10 100} {full-duplex half-duplex}} {1000 full-duplex } no capabilities all {{10 100} {full-duplex half-duplex}} {1000 full-duplex }

10 - 10BASE-T

100 - 100BASE-T

1000 - 1000BASE-T full-duplex - Full duplex half-duplex - Half duplex

all - This command represents all interfaces.

no - This command removes the advertised capability with using parameter

Default Setting

10 half-duplex, 10 full-duplex, 100 half-duplex, 100 full-duplex, and 1000 full-duplex

Command Mode

Global Config

5.2.1.8storm-control flowcontrol

This command enables 802.3x flow control for the switch.

63