Fortinet MR1 manual Switchport forbidden vlan

Default Setting

None

Command Mode

Global Config

This command adds the <protocol> to the protocol-based VLAN identified by <group-name>. A group may have more than one protocol associated with it. Each interface and protocol combination can only be associated with one group. If adding a protocol to a group causes any conflicts with interfaces currently associated with the group, this command will fail, and the protocol will not be added to the group. The possible values for protocol are ip, arp, and ipx.

Syntax

switchport protocol group add protocol <group-name> {ip arp ipx} no switchport protocol group add protocol <group-name> {ip arp ipx}

<group-name> - a VLAN Group Name (a character string of 1 to 16 characters). ip - IP protocol.

arp - ARP protocol. ipx - IPX protocol.

no - This command removes the <protocol> from this protocol-based VLAN group that is identified by this <group-name>. The possible values for protocol are ip, arp, and ipx.

Default Setting

None

Command Mode

Global Config

5.2.3.17switchport forbidden vlan

This command used to configure forbidden VLANs.

84