Fortinet MR1 manual Ip ospf dead-interval, Syntax Ip ospf cost 1-65535 no ip ospf cost

Syntax

ip ospf cost <1-65535> no ip ospf cost

<1-65535 > - The range of the cost is 1 to 65535.

<no> - This command configures the default cost on an OSPF interface.

Default Setting

The default cost value is 10.

Command Mode

Interface Config

6.3.2.29ip ospf dead-interval

This command sets the OSPF dead interval for the specified interface.

Syntax

ip ospf dead-interval <1-2147483647> no ip ospf dead-interval

<1-2147483647> - It is a valid positive integer, which represents the length of time in seconds that a router's Hello packets have not been seen before its neighbor routers declare that the router is down. The value for the length of time must be the same for all routers attached to a common network. This value should be some multiple of the Hello Interval (i.e. 4).

<no> - This command sets the default OSPF dead interval for the specified interface.

Default Setting

The default dead interval is 40 seconds.

Command Mode

Interface Config

341