Command Usage
Once the IP address is set, the VLAN ID’s value will be assigned to management VLAN.
5.3.1.7ip default-gateway
This command sets the IP Address of the default gateway.
Syntax
ip default-gateway <gateway> no ip default-gateway
<gateway > - IP address of the default gateway
no - Restore the default IP address of the default gateway
Default Setting
IP address: 0.0.0.0
Command Mode
Global Config
5.3.1.8ip address protocol
This command specifies the network configuration protocol to be used. If you modify this value, the change is effective immediately.
Syntax
ip address protocol {bootp dhcp none}
<bootp> - Obtains IP address from BOOTP.
129
