5.10.2Configuration Commands
5.10.2.1sntp broadcast client poll-interval
This command will set the poll interval for SNTP broadcast clients in seconds as a power of two where
Syntax
sntp broadcast client
no - This command will reset the poll interval for SNTP broadcast client back to its default value.
Default Setting
6
Command Mode
Global Config
5.10.2.2sntp client mode
This command will enable Simple Network Time Protocol (SNTP) client mode and optionally setting the mode to either broadcast, multicast, or unicast.
Syntax
sntp client mode [broadcast unicast] no sntp client mode
no - This command will disable Simple Network Time Protocol (SNTP) client mode.
232