Fortinet MR1 manual Distance ospf, Distribute-list out

<1-16777215> - The range of default metric is 1 to 16777215.

<no> - This command configures the default advertisement of default routes.

Default Setting

None

Command Mode

Router OSPF Config

6.3.2.22distance ospf

This command sets the route preference value of OSPF in the router. Lower route preference values are preferred when determining the best route. The type of OSPF can be intra, inter, type-1, or type-2. The OSPF specification (RFC 2328) requires that preferences must be given to the routes learned via OSPF in the following order: intra < inter < type-1 < type-2.

Syntax

distance ospf {intra inter type1 type2} [<preference>] no distance ospf {intra inter type1 type2}

<preference> - The range for intra is 1 to 252. The range for inter is 2 to 253. The range for type1 is 3 to 254. The range for type2 is 4 to 255.

<no> - This command sets the default route preference value of OSPF in the router.

Default Setting

The default preference value for intra is 8. The default preference value for inter is 10. The default preference value for type 1 is 13. The default preference value for type 2 is 150.

Command Mode

Router OSPF Config

6.3.2.23distribute-list out

This command is used to specify the access list to filter routes received from the source protocol.

337