
Syntax
show ip mcast
Default Setting
None
Command Mode
Privileged Exec
Display Message
Admin Mode: This field displays the administrative status of multicast. This is a configured value.
Protocol State: This field indicates the current state of the multicast protocol. Possible values are Operational or
Table Max Size: This field displays the maximum number of entries allowed in the multicast table.
Number Of Packets For Which Source Not Found: This displays the number of packets for which the source is not found.
Number Of Packets For Which Group Not Found: This displays the number of packets for which the group is not found.
Protocol: This field displays the multicast protocol running on the router. Possible values are PIMDM, PIMSM, or DVMRP.
Forwarding Multicast Stream Entry Count: This field displays the number of entries in the multicast table.
Highest Entry Count: This field displays the highest entry count in the multicast table.
7.3.1.2show ip mcast boundary
This command displays all the configured administrative scoped multicast boundaries.
Syntax
show ip mcast boundary {<slot/port> all}
<slot/port > - Interface number.
all - This command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
394