Fortinet MR1 manual Viewing PIM-SM Global Configuration

Data Threshold Rate - Enter the minimum source data rate in K bits/second above which the last-hop router will switch to a source-specific shortest path tree. The valid values are from (0 to 2000 K bits/sec) . The default value is 50.

Register Threshold Rate - Enter the minimum source data rate in K bits/second above which the Rendezvous Point router will switch to a source-specific shortest path tree. The valid values are from (0 to 2000 K bits/sec) . The default value is 50.

Command Buttons

Submit - Send the updated configuration to the router. Configuration changes take effect immediately. These changes will not be retained across a power cycle unless a save is performed.

Viewing PIM-SM Global Configuration Page

Non-Configurable Data

Admin Mode - The administrative status of PIM-SM in the router: either enable or disable. Join/Prune Interval - The interval between the transmission of PIM-SM Join/Prune messages.

Data Threshold Rate - The minimum source data rate in K bits/second above which the last-hop router will switch to a source-specific shortest path tree.

Register Threshold Rate - The minimum source data rate in K bits/second above which the Rendezvous Point router will switch to a source-specific shortest path tree.

Command Buttons

Refresh - Refresh the data on the screen with the present state of the data in the router.

636