Fortinet MR1 manual Snmp-server host, Snmp-server enable traps

<ro> - access mode is read-only. <rw> - access mode is read/write.

Default Setting

None

Command Mode

Global Config

5.3.4.7snmp-server host

This command sets a client IP address for an SNMP community. The address is the associated community SNMP packet sending address and is used along with the client IP mask value to denote a range of IP addresses from which SNMP clients may use that community to access the device. A value of 0.0.0.0 allows access from any IP address. Otherwise, this value is ANDed with the mask to determine the range of allowed client IP addresses. The name is the applicable community name.

Syntax

snmp-server host <ipaddr> <name> no snmp-server host <name>

<name> - community name. <ipaddr> - a client IP address.

no - This command sets a client IP address for an SNMP community to 0.0.0.0. The name is the applicable community name.

Default Setting

0.0.0.0

Command Mode

Global Config

5.3.4.8snmp-server enable traps

This command enables the Authentication trap.

147